Wyrestorm 4K 4×4 HDBaseT Matrix with Receivers

4K UHD AND HDR SUPPORT
Small in price yet big on specification, the 4×4 kit can handle current video content up to 4K/60 4:2:0 covering a majority of current source devices, even supporting 10-bit HDR content at up to 30Hz and multi-channel audio. Powerful HDBaseT technology sends this, IR control and PoH for the included recievers up to 35m/115ft.

DE-EMBEDDED AUDIO
With audio functionality to match its video capability, the 4×4 kit has the ability to extract audio signals from the output, following the zone. Having S/PDIF connectivity means having the flexibility to send multi-channel 5.1 audio to local AVR’s or downmix to stereo using the EXP-CON-DAC-D.

CEC TRIGGERING
Working automatically on signal presence or triggered via the API, this 4×4 kit can send power trigger commands to all compatible connected screens or projectors meaning an integrated autonomous control solution.

A/V MUTE FUNCTION
Certain applications in the residential, education and commercial markets don’t always require a source to be routed through to an output. The 4×4 kit makes it possible to “mute” the video output as well as the audio, meaning that the HDMI signals to the zones can be independently switched off via the API.

Technical Specifications
AUDIO & VIDEO
Inputs
4x HDMI In: 19-pin type A

Outputs
4x S/PDIF Out: RCA Female
3x HDBT Out: 8-pin RJ-45 Female
1x HDMI Out: 19-pin type A

Video Encoding
HDBaseT Class B

Encoding Data Rate

9.2Gbps

End to End Latency
10s (micro seconds)

Audio Formats
HDMI/HDBaseT: 2ch LPCM | Multichannel up to Dolby Atmos and DTS-X
S/PDIF: 2ch LPCM | Dolby Digital/DTS up to 5.1ch
Analog: 2ch Analog

Video Resolution (Max)
1920x1080p @60Hz 16bit
3840x2160p @60Hz 8bit 4:2:0

Supported Standards

DCI (4096×2160) | RGB | HDR | HDR10 | Dolby Vision up to 30Hz | HLG | BT.2020 | BT.2100

Maximum Pixel Clock
HDBaseT: 340MHz

COMMUNICATION & CONTROL
HDMI
HDMI 2.0 | HDCP 2.2 | EDID | CEC | DVI/D supported with adapter (not included)

HDBaseT

HDMI 2.0 | HDCP 2.2 | EDID | CEC | 1-way PoH | Bidirectional IR

CEC

CEC power triggering for connected screens – Requires CEC compatibility

IR
3x IR RX: 3.5mm (1/8in) TRS Stereo
4x IR TX: 3.5mm (1/8in) TS Mono
Bidirectional over HDBaseT

RS-232

1x RS-232: 9-pin DB9 Female

Ethernet

1x LAN: 8-pin RJ-45 Female

POWER
Power Supply
100~240V AC 50/60Hz

Max Power Consumption
48.2W

Additional Features:

• HDBaseT enables 60Hz 4K UHD content (8-bit) to be sent over HDBaseT to 35m/115ft
• Compatible with DVI-I and DP++ v1.3 signals from compatible devices
• 4 audio outputs allow audio to be independently de-embedded from outputs via S/PDIF coaxial
• SmartEDID feature also dynamically detects display/source capabilities and automatically outputs the highest possible resolution
• Additional EDID management through DIP switches for global setting or via WebUI for independent management of EDID per source
• Embedded WyreStorm WebUI enables simple source switching and installer set-up & configuration
• WebUI includes full EDID management to read, copy, store or import EDID from connected devices
• Assign a different EDID to each connected source device
• API triggered standby mode puts unit into low power state during downtime
• Flexible control options – front panel buttons, infrared remote control, local IR, RS-232, Telnet or WebUI
• 3.5mm jack input for receiving local IR commands out of line-of-sight
• 2-way IR for far-end device control from control system or source control from a zone